Pieza GOS CORE

Spare Part GOS 3D

CORE-S
€5,90
Skip to product information
Pieza GOS CORE

Spare Part GOS 3D

€5,90

Replacement GOS part for our CORE leashes, 3D printed with MATTE ASA filament.

This part serves to replace the original part of your leash if it has broken due to biting or deteriorated with use.

Choose the correct size depending on whether you have a CORE-S or CORE-M.

Size
Instrucciones

1. First, remove the end cap from the strap.
If it does not come off easily, you will have to cut it with scissors.

2. Once removed, carefully burn any loose threads to prevent the rope from fraying.

3. Move the 3D part down. Keep in mind that the bottom rope is sewn and the part is glued, so it may be a little difficult to remove.

4. Undo the double knot in the rope and remove the carabiner.

5. Insert the new 3D part onto the rope and reattach the carabiner.

6. Tie the double knot again and tuck the excess rope inside the part. Tighten the knot very well. We recommend adding a little glue to the rope to fix the part back in place.

7. Finally, attach the end cap, also with a little glue.

Important:

This spare part is designed to help you extend the life of your strap and repair it yourself at home. If you have any questions during the process, write to us and we will help you. And if you prefer that we repair the strap for you, you can hire our repair service.

Una correa versátil, segura y pensada para
el día a día con tu perro.

Ver más